Enviroheat 200L Heat Pump Hot Water System

The Enviroheat 200L Heat Pump Hot Water System is available online from Hot Water Outlet with metro delivery available in selected areas Australia wide.

Customers can purchase the Enviroheat 200L as a supply-only heat pump hot water system and request assistance arranging installation quotes after purchase through licensed local installers in selected metro regions.

The Enviroheat 200L is an energy-efficient heat pump hot water system designed for households wanting to replace a traditional electric storage water heater with a lower-running-cost alternative. With a 195L nominal tank volume, 10A plug and cord connection, R134a refrigerant, dual anode corrosion protection, smart control modes and quiet operation, it is a practical option for smaller to medium homes wanting heat pump hot water without moving to a larger 250L system.

About the Enviroheat 200L Heat Pump

The Enviroheat 200L Heat Pump uses air-source heat pump technology to draw heat from the surrounding air and transfer that heat into the stored water. This helps reduce reliance on direct electric element heating and can reduce water heating energy use compared with a conventional electric storage water heater.

This model is commonly referred to as a 200L heat pump, with the official model 200EH1-14 listing a 195L tank volume. It is designed as a monobloc air-source heat pump water heater and includes an auxiliary electric heating element for boost support when required.

The system is designed to operate in ambient temperatures down to -7°C, with auxiliary electric heating support available when operating conditions fall outside the heat pump’s preferred range. It also includes smart operating modes such as Eco, Auto, Boost, Holiday and anti-legionella sanitisation control.

Buy Enviroheat 200L Supply Only

Order the Enviroheat 200L Heat Pump Hot Water System online from Hot Water Outlet with metro delivery available in selected areas across Australia.

This option is ideal for customers who already have a licensed plumber, electrician or installer arranged and only need the unit supplied.

The supply-only product price includes the heat pump hot water system itself.

Installation, old system removal, disposal, valve kits, electrical work, plumbing alterations, drainage changes, compliance upgrades and additional site requirements are not included unless separately quoted.

Supply-only is ideal for customers searching for:

• Enviroheat 200L price

• Enviroheat 200L heat pump for sale

• Enviroheat 200EH1-14 heat pump

• Enviroheat 200L supply only

• 200L heat pump hot water system supply only

• Enviroheat heat pump water heater

• 10 amp heat pump hot water system

• Energy efficient hot water system

Installation Quotes Available After Purchase

Hot Water Outlet does not directly provide installation services.

After purchasing the Enviroheat 200L Heat Pump Hot Water System, customers in selected metro areas may request assistance arranging installation quotes through licensed local plumbers and electricians.

Installation quote availability depends on:

• service location

• installer availability

• existing system type

• property access

• plumbing suitability

• electrical requirements

• drainage requirements

• compliance requirements

Additional installation costs may apply for:

• valve upgrades

• electrical upgrades

• drainage changes

• pipework changes

• difficult access

• concrete bases

• old system removal

• disposal

• compliance upgrades

Enviroheat 200L Delivery Brisbane

Hot Water Outlet offers metro delivery for the Enviroheat 200L Heat Pump Hot Water System in selected Brisbane areas.

Customers can order online and request assistance arranging installation quotes after purchase where available.

Enviroheat 200L Delivery Gold Coast

Hot Water Outlet offers metro delivery for the Enviroheat 200L Heat Pump Hot Water System in selected Gold Coast service areas.

Customers can purchase online and organise installation separately or request help arranging installation quotes after purchase.

Enviroheat 200L Delivery Sydney

Hot Water Outlet offers metro delivery for the Enviroheat 200L Heat Pump Hot Water System in selected Sydney metro areas.

Customers can order online with installation quote assistance available after purchase in selected locations.

Enviroheat 200L Delivery Melbourne

Hot Water Outlet offers metro delivery for the Enviroheat 200L Heat Pump Hot Water System in selected Melbourne metro areas.

Customers can purchase the system online and request help arranging installation quotes after delivery.

Is the Enviroheat 200L Right for Your Home?

The Enviroheat 200L Heat Pump may be suitable if you are replacing a standard electric storage hot water system and want a heat pump option with smart timer control, boost support and lower energy use than conventional electric storage.

It is commonly suited to:

• smaller to medium households

• townhouses

• rental properties

• compact homes

• customers wanting a practical heat pump upgrade without choosing a larger 250L tank

Real-world suitability depends on household size, shower length, water usage, tariff setup, climate, installation location, airflow, drainage, electrical supply and household hot water habits.

This system may suit you if:

• you are replacing an existing electric hot water system

• you want a compact 200L-class heat pump hot water system

• you want a 10A plug and cord heat pump model

• you want smart timer control to help use daytime solar PV where suitable

• your household has moderate hot water demand

• your property has suitable airflow, drainage and installation space

• your electrical setup is suitable for the selected model

• you prefer supply-only purchase flexibility

Additional installation work may be required depending on:

• existing plumbing condition

• electrical requirements

• drainage requirements

• access limitations

• compliance upgrades

• valve condition

• installation airflow and clearance requirements

Key Features of the Enviroheat 200L

• 200L-class heat pump hot water system

• Official model 200EH1-14

• 195L nominal tank volume

• Monobloc air-source heat pump design

• Standard 10A plug and cord connection

• R134a refrigerant

• 1.5kW auxiliary electric heating element

• Smart control system

• Eco mode for timer-based operation

• Auto mode for demand-based operation

• Boost mode for faster hot water recovery

• Holiday mode for periods away from home

• Automatic anti-legionella sanitisation cycle

• Dual anode corrosion protection

• Sacrificial magnesium anode protection

• IPX4 insulation protection rating

• 46 dBA listed sound pressure level

• Temperature setting range from 35°C to 75°C with heater

• Default temperature setting of 55°C

• Ambient heat pump operating range from -7°C to 45°C

• G3/4" female water connections

• Designed to work well with solar PV timer scheduling

• STC eligible across listed zones

• 5-year warranty under Enviroheat warranty terms

Quick Specs

Brand: Enviroheat
Product: Enviroheat 200L Heat Pump Hot Water System
Model: 200EH1-14
System Type: Monobloc air-source heat pump water heater
Nominal Tank Volume: 195L
Marketed Size: 200L class
Power Supply: 220V–240V / 50Hz
Connection: 10A plug and cord
Tank Rated Pressure: 700 kPa
Relief Valve Pressure: 700 kPa
Refrigerant: R134a
Refrigerant Charge: 0.9kg
Corrosion Protection: Magnesium rod / sacrificial anode
Insulation Protection Rating: IPX4
COP at 7°C: 3.04
COP at 15°C: 3.39
Tapping Cycle: L
Auxiliary Heating Element: 1500W
Rated Heat Pump Input: 495W
Maximum Heat Pump Input: 865W
Maximum Power Input: 1500W
Standby Power Input: 35W
Heating Up Time at 7°C: 5.50 hours
Heating Up Time at 15°C: 4.68 hours
Default Temperature Setting: 55°C
Temperature Setting Range With Heater: 35°C–75°C
Sound Pressure Level: 46 dBA
Ambient Operating Range: -7°C to 45°C
Water Inlet and Outlet Connection: G3/4" female
Safety Valve Connection: G3/4" female
Drain and Water Inlet Connection: G3/4" female
Product Dimensions: 600mm x 629mm x 1692mm
Packing Dimensions Without Pallet: 736mm x 695mm x 1810mm
Packing Dimensions With Pallet: 736mm x 695mm x 1940mm
Net / Gross Weight: 91kg / 103kg
Warranty: 5 years subject to Enviroheat warranty terms

Solar-Ready Timer Control

The Enviroheat 200L includes timer control that can be programmed to run during selected periods of the day.

This can be useful for homes with solar PV, where the system may be scheduled to operate during daylight hours when solar generation is available. The insulated tank then stores heated water for use later in the evening or morning depending on household demand and system settings.

A second timer can also be used for early morning boost-style operation where extra hot water support is required.

Smart Operating Modes

The Enviroheat 200L Heat Pump includes multiple operating modes to help match hot water heating to household routines.

Operating modes may include:

• Auto mode for demand-based hot water delivery

• Eco mode for timer-based operation and solar PV scheduling

• Boost mode for faster recovery using auxiliary heating support

• Holiday mode for periods when hot water is not required

• Anti-legionella sanitisation cycle for stored water hygiene

• Screen lock and diagnostic functions through the display

These control options help make the Enviroheat 200L a practical heat pump option for customers wanting a simple set-and-forget system with extra control when needed.

Dual Anode Protection

The Enviroheat heat pump range includes dual anode protection to help reduce corrosion risk and support tank life.

This can be useful in areas with harder or poorer water quality, where anode condition and routine servicing can play an important role in long-term hot water system performance.

Correct maintenance, water quality, installation compliance and warranty conditions still apply.

Heat Pump Efficiency

The Enviroheat 200L uses heat pump technology to absorb heat from the surrounding air and transfer that energy into the stored water.

This allows the system to generate more heat output than the electrical energy consumed under suitable conditions. Actual energy savings can vary depending on the water heater being replaced, installation location, climate, tariff setup, timer settings, household usage and whether solar PV is used to power the system during the day.

Common Uses

The Enviroheat 200L can be suitable for:

• electric hot water system replacement

• heat pump hot water upgrades

• smaller to medium homes

• townhouses

• rental properties

• compact homes

• homes with solar PV where daytime operation can be scheduled

• customers wanting lower energy use than standard electric storage

• customers wanting a 10A plug and cord heat pump

• homes wanting a compact heat pump solution

Frequently Asked Questions

Can I buy the Enviroheat 200L supply only?

Yes. The Enviroheat 200L can be purchased online as a supply-only product with delivery available in selected metro areas.

Does Hot Water Outlet install heat pump hot water systems?

No. Hot Water Outlet does not directly provide installation services. Customers may request assistance arranging installation quotes after purchase in selected metro areas.

Can I get an installation quote after purchasing?

Yes. Customers in selected metro areas may request help arranging installation quotes through licensed local installers after purchasing the system.

Is delivery available Australia wide?

Metro delivery is available in selected service areas across Australia. Delivery availability may vary depending on location and product type.

What is the model number for the Enviroheat 200L?

The Enviroheat 200L-class heat pump model is 200EH1-14.

Is the Enviroheat 200L exactly 200 litres?

The Enviroheat 200L is commonly marketed as a 200L-class heat pump hot water system. The official nominal tank volume for model 200EH1-14 is 195L.

Is the Enviroheat 200L plug-in or hardwired?

The Enviroheat 200EH1-14 is equipped with a 10A plug and cord for connection to a suitable weatherproof power outlet on a compatible electrical circuit.

What refrigerant does the Enviroheat 200L use?

The Enviroheat 200L uses R134a refrigerant.

What is the COP of the Enviroheat 200L?

The Enviroheat 200EH1-14 is listed with a COP of 3.04 at 7°C and 3.39 at 15°C under stated conditions.

What is the noise level of the Enviroheat 200L?

The Enviroheat 200L is listed with a 46 dBA sound pressure level.

What is the temperature setting range?

The Enviroheat 200L has a temperature setting range from 35°C to 75°C when using heater support, with a default temperature setting of 55°C.

Can the Enviroheat 200L work with solar PV?

Yes. The Enviroheat 200L includes timer settings that can be used to schedule operation during daylight hours, helping homes with solar PV make better use of daytime solar generation where suitable.

Does the Enviroheat 200L have boost mode?

Yes. The system includes Boost mode, which activates auxiliary heating support for faster hot water recovery when required.

Does the Enviroheat 200L have holiday mode?

Yes. Holiday mode allows the system to be set for periods when hot water is not required, then return to operation before the home is occupied again.

Does the Enviroheat 200L have anti-legionella control?

Yes. The system includes an automatic anti-legionella sanitisation function designed to periodically raise stored water temperature for hygiene control.

Is the Enviroheat 200L suitable for replacing an electric hot water system?

Yes. The Enviroheat 200L can be a practical heat pump replacement option for selected electric hot water systems provided the property has suitable space, airflow, drainage, electrical supply and plumbing conditions.

Is the Enviroheat 200L eligible for STCs or rebates?

The Enviroheat 200L may be eligible for STCs and other incentives where requirements are met. Eligibility and value can vary depending on location, installation year, product model, installer requirements and program rules.

What warranty does the Enviroheat 200L have?

Enviroheat lists a 5-year warranty subject to warranty policy terms, installation requirements and product conditions.

* Requested element size may come delivered separately to system for electric systems - All units supplied with factory with 3.6kW

**Where a unit supplied is capable of supplying more than 50°C, a tempering valve must be installed on the property or purchased as part of a valve kit with your order.

Buying a new hot water system or hot water part should be simple. Hot Water Outlet helps you compare hot water systems, valves, thermostats, elements, pipework and fittings in one place, so you can choose the products that suit your home, budget and hot water needs without the back and forth.

Whether you already know exactly what you need or you are still comparing electric, gas, instant gas, gas storage or heat pump hot water options, Hot Water Outlet makes it easier to order with confidence.

Why Customers Choose Hot Water Outlet

Hot Water Systems and Parts in One Place

Shop hot water systems, valves, thermostats, elements, pipework and fittings online from one focused hot water store. Choose the system first, then add the parts and accessories needed for your setup.

Clear Product Pricing Before Checkout

See your hot water system price upfront, then add common valves, fittings or accessories before placing your order. This makes it easier to plan your purchase and compare options before checkout.

Product Details That Actually Help

Key specs, sizing details, tank capacity, flow rate, gas type, energy source, dimensions, warranty information, product features and suitability notes are shown clearly, so you can compare hot water systems properly before you buy.

Valves and Accessories Available

Where relevant, you can add common hot water parts such as tempering valves, pressure relief valves, duo valves, non-return valves, thermostats, elements, pipework and fittings to help complete your order.

Built for Australian Hot Water Buyers

Hot Water Outlet is focused on hot water systems and accessories for Australian homes, rentals, renovations and replacement projects. Browse trusted brands and compare practical options for common household hot water needs.

One Simple Online Order

Add your hot water unit and selected parts to cart in one order, instead of searching across multiple suppliers for systems, valves, fittings and accessories.

Practical Help Before You Buy

Not sure which hot water system, size, energy type or accessory is right? Hot Water Outlet gives you a clearer way to compare electric hot water systems, heat pump hot water systems, gas storage hot water systems and instant gas hot water units before you order.

Designed To Make Your Decision Easier

Hot Water Outlet is built for customers who want a faster, clearer and more convenient way to buy hot water systems and hot water parts online.

Instead of guessing which product suits your home, searching multiple suppliers, or trying to match accessories separately, you can review the system, compare the specifications and add common hot water parts before checkout.

Choose your hot water system.

Add the valves and accessories you need.

Compare product details before checkout.

Order online with confidence.

It is a simpler way to buy the hot water products and parts that matter most.

Important Note

Product suitability can vary by property, existing services, energy source, gas type, available space, connection points, pressure requirements and local compliance requirements. Always check product specifications carefully and confirm the selected hot water system, valves, fittings and accessories are suitable for your property before ordering.

Standard Delivery: 2–8 business days

Express Delivery: 1–4 business days

90% of products are delivered the next business day where stock, postcode eligibility and freight availability allow.

Delivery timeframes are estimates and may vary by product, stock location, delivery postcode, carrier availability and order timing. Wet weather, storms, flooding or unsafe site access may delay delivery and are additional to any advertised or guaranteed freight timeframes.